Print Reports and report designer

Discussions about Diving Log 6.0 - questions and hints
Post Reply
schsumpster
Posts: 2
Joined: Mon Jul 16, 2018 01:49
Contact:

Print Reports and report designer

Post by schsumpster »

What am I doing wrong? I am trying to print my dive logs. I've gone to PRINT and then to DESIGNER. I designed what I want my dive logs to look like and can print from there. BUT, the only way I can do it is to select a dive, goto designer, then I have to load my log design and then print. When I want to print another page, I have to start over with selecting a dive, goto designer, select my design and then print.

If I tell it to print from the print dialog, I get "Wrong report file for this kind of data."

Is there another way to print directly using the log design I made?
Brian Rose
Master Scuba Diver
Diving (off and on) since 2003
divinglog
Site Admin
Posts: 5768
Joined: Sat Feb 08, 2003 21:02
Location: Coburg
Contact:

Re: Print Reports and report designer

Post by divinglog »

Hi Brian

The normal way is actually from the print dialog. Are you sure you've selected the correct (your) report file in the print dialog in the "Logbook" section? Check the blue clickable link with the selected report file.

The error message means that the report file you're trying to use for printing is not the right one for the selected data, e.g. using an "Equipment" report file in the logbook section.

You can send me your report file and I'll have a look if there are any problems.

Kind regards,
Sven
Post Reply